Other

Hurdy Gurdy is another nifty device that keeps a rear wheel from slipping forward in the dropout under pedal load. It's designed for the Cross-Check's semi-horizontal front-loading dropouts, and will also work on many other similar dropouts. Hurdy Gurdy is investment cast of stainless steel for durability and good looks, and shares many of Tuggnut's design features. Its two axle holes allow for a wide variety of fore/aft wheel positions, it will work with standard QRs, bolted axles, and nutted axles up to 10mm.

Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.

These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side. - Hinged clamps for easy installation without removing other components - AL-6061, anodized black - 23 grams - For use only with I-Spec II compatible shifters or dropper lever

RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!

The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru-axle system.

The tool-free Maxle Lite brings exceptional stiffness and durability to your fork in a light, easiest-to-use expanding wedge thru-axle system. - Thread Length: 9mm - Thread Pitch: 15 x 1.5mm

Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.

If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.

The Problem Solvers Handlebar Accessory Mount comes in handy when you don't have enough room on your handlebars for mounting all your accessories. It fits onto all handlebars, holds tightly and gives you 80mm of width for mounting more of your essential devices where they're easy to see and use (photo).

- Grade 10 chromium steel balls

- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains - DLC Coated - Non-reusable - Opening Tool Required - Card of 2 pairs

ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake. - Made from CNC Machined T6061 Aluminum - Anodized Black - No additional hardware needed ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters

One of the coolest things about Surly is if they can't find an existing part that fits their standards, they just make one themselves. This cable hanger is made to fit around the oversize bolt on their Constrictor seatpost clamp so you can be sure it will fit around almost any other seatpost clamp bolt too. It comes complete with an adjusting barrel.

Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look. - Designed to work with rear (right side) brakes and shifters - Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters - For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque - 6061-T6 aluminum - ISEV-ISB is for a Shimano I-SPEC EV shifter mounting to a Shimano I-SPEC B brake

Mylar-laced woven elastic guard stretches around your fork to block mud/water as you ride.

Original equipment ceramic bearing pulleys and inner cage for SRAM XX1 Eagle rear derailleurs.

X01 Eagle Cable Anchor Kit

GXP Shield and Wave Washer

Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes

- 200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals, Charger 2 sealhead,DebonAir seals)—Lyrik B1/Pike 29+ (2018+)

- Lyrik and Pike 29+ Solo Air 1 year service kit - Includes dust seals, foam rings, o-ring seals, Charger sealhead, SA sealhead

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

The OSPW X System for Shimano XT/XTR 1x12 reduces friction by 35-40% compared to stock pulley configurations. The lightweight, custom-molded carbon fiber cage ensures durability. This design allows the use of the same length chain as stock pulleys. The 14-tooth upper and 18-tooth lower pulley profiles ensure stable chain retention while reducing drag. The OSPW X System is developed, designed, and handbuilt in Denmark—and proven globally. Only compatible with 1X specific derailleurs. - Pulley Wheels: CeramicSpeed 14-tooth upper and 18-tooth lower - Pulley Wheel Material: aluminum - Cage Material: Carbon-reinforced PA - Bearing Options: CeramicSpeed Standard or Coated - CeramicSpeed Grease/oil: CeramicSpeed Pulley Oil - Compatibility: Shimano XTR M9100-SGS, Shimano XTR M9100-GS, Shimano XT M8100-SGS and SLX M-7100 derailleurs - Cassette Compatibility: Up to a 10-51 tooth range - Spring Tension Settings: 2 spring tension settings - Speed: 12-speed - Discipline: Off-Road In the box: - Complete OSPW System for Shimano XT/XTR 1x12 - CeramicSpeed Pulley Oil, 15 ml - Sticker Sheet

22.2mm shim kit to mount control levers. Slater bars are 19mm diameter. The shim kit allows for standard 22.2mm brake, shift and dropper post levers to be used.

Heavy duty bolt-on aluminum seatpost clamp.

Replacement Pulley Wheels for the CeramicSpeed OSPW System. Includes 2 pulley wheels. - Precision-machined aluminum pulleys - For use with CeramicSpeed's Oversized Pulley Wheel System only - Coated races increase bearing service life by increasing hardness of race and reducing corrosion - CeramicSpeed products with coated bearings include a 6-year warranty

Developed and designed entirely by CeramicSpeed, the Oversized Pulley Wheel (OSPW) System for Shimano 9000/6800 provides the ultimate optimization of your bicycle's drivetrain. This OSPW System features a set of 17-tooth aluminum Pulley Wheels housed in a specially designed polyamide (PA) and carbon cage. The upper and lower 17-tooth oversized aluminum pulley wheels come fitted with either standard or coated CeramicSpeed Bearings. The Oversized Pulley Wheel (OSPW) System is the product of choice by many of the world's leading cycling teams and triathletes. This specific system is compatible with Ultegra 6700/6770/6800/6870 mechanical and Di2 rear derailleurs and Dura Ace 7900/7970/9000/9070 mechanical and Di2 rear derailleurs. It is not compatible with Shimano Dura-Ace 9100/9150 and Ultegra 8000 series rear derailleurs. For those rear derailleurs you will need a OSPW System for Shimano 9100 series. The system is compatible with up to a 28-tooth cassette on most bikes, depending on derailleur hanger. The typical overall power savings of the OSPW System for Shimano 9000/6800 is 30%-60% over a stock setup, and the oversized pulley wheels have a lifespan that is 3-5 times longer than the commonly used standard pulleys on the market. In The Box: - A complete 17-tooth OSPW System - CeramicSpeed bearing oil in 15ml dropper bottle

The Vortex Redeux top cap features a unique, lightweight design. - Machined from 6061 aluminum with a deeply recessed Allen wrench broach - slim shape to better work with stems that have a recessed compression bolt area - Uses a 6mm Allen key - 0.5 oz

- Lever Internals Gen 2 Guide RSC/Ultimate|Code RSC Qty 1

- Bolt On adapters

A seatpost retention plug that holds an electronic shifting system battery securely inside ENVE carbon seatposts. Electronic shifting is the gold standard and more bikes are coming equipped with these groups. Housing the battery into the seatpost is an elegant solution and a good use of space. Available in 25.4, 27.2, and 30.9/31.6mm sizes, these plugs are designed to provide excellent battery retention and interface perfectly with ENVE carbon seatposts.

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm

Downtube cable adjusters from Problem Solvers. - Braze-on downtube adjusters for road shifters - Contoured to fit traditional sized steel downtubes - Black Finish

The Problem Solvers Clamp-On Cable Guides are for clamping on the rear brake cable housing on your frame when the frame doesn't have provisions for holding a full-length brake cable housing. You get 3 stainless-steel clamps and the nuts and bolts for them.

The Problem Solvers GXP Spindle Adapter Kit lets you adapt a GXP crankset to a BB30 or Press-Fit 30 bottom bracket. It's used with the Problem Solvers BB30/Press-Fit 30 Adapter Kit, which is sold separately.

The Problem Solvers Sheldon Fender Nuts are an awesome way to avoid the brake-centering problems caused by mounting fenders directly to your brakes. They're named after the inventor and bike guru, Sheldon Brown. These special Sheldon nuts take the place of your existing brake nuts. They have threaded extensions for standard 6mm bolts (sold separately) providing a secure mounting place for your fenders that won't mess with your brake adjustment. They make it easier/faster to install and remove fenders, too, so they're great for commuting bicycles.

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Derailleur shims for adapting front derailleur clamps to a different sized frame seat tube. - Derailleur = the size of the clamp on the front derailleur you have - Frame = the size of the seat tube the derailleur plus shim will fit

Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look. - Designed to work with rear (right side) brakes and shifters - Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters - For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque - 6061-T6 aluminum - ISEV-MM is for a Shimano I-SPEC EV shifter mounting to a SRAM MatchMaker brake

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

Magura Caliper Cover Ring Kit

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Shimano Deore XT M8000 chainring bolts. - Color: Black - Material: Aluminum - Type: Torx

Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut

Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. - KEB-SL - linear strand, Kevlar reinforced, compressionless brake housing with Slick-Lube liner - Perfect for full-housing, high-performance bikes with mechanical disc or rim brakes - 20 black alloy lined end caps, 10 black POP end caps included

Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.

These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner. - 6mm length - Made in the US out of 7075-T6 Aluminum - Has hex heads on both the bolt and nut for easy installation - Max torque of 7-8 Nm with light grease on threads only

This stem cap is where your bike fashion sense and the weight weenie in you collide. This Ultralight and ultra-sleek stem cap integrates a 5mm, 10mm or 15mm headset spacer with your stem cap in finely machined piece. Why have extra steerer tube requiring spacers on top of your stem you ask? Well, many carbon steerers require that the steer tube extend above the stem. Also, riders may want the flexibility to move handlebar height up and down for different types of riding or for bike re-sale. - Design and manufactured in Minneapolis, MN USA - 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only - 6061-T6 aluminum - 5mm internal cylinder wall height - Black aluminum bolt included Total weight (cap + bolt): 5mm= 12g. Compare to a standard flat stem cap and steel bolt at 20 grams + spacers add even more.

All-round protection. The Chainbow chain protector is made of impact-resistant black plastic and aluminum, and offer perfect protection from the chain. Thanks to the telescoping function and the variable positioning of the angle bracket, this chain protector is adaptable to many frame geometries and component combinations.

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

The Ergo is the core of our new family of fit and comfort focused armrests. It offers a smoothly curved shape designed to comfortably cup the elbows while providing good support and control. The bolt pattern yields 48 possible configurations just by moving the armrest. The Ergo is compatible with all current aerobars and earlier models that used the F-19, F-22, F-35 or F-40 armrests. - Armrest Construction: Injected Nylon/Glass Fiber - Pad Construction: EVA foam with anti-bacterial/anti-microbial Lycra cover - Pad Model: 10mm - Color: Matte Black - Hardware: M6 x 10 FHB - Weight: 145g/pair

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Gnarwolf Chainguide

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.